6. Remove the board from the chassis.
7. Remove the processor from the old system board and install it on the new
8. Remove any of the following installed options on the old system board, and
9. Ensure that the new system board jumper settings match the old system board
Replacing a processor
Make sure the processor is fully seated in its socket and that the goal post latches
are engaged.
Replacing the speaker
1. Remove the cover (see "Removing the cover" on page 15).
32
Hardware Maintenance Manual A40 Type 6840 A40P Type 6841 A40i Type 2271: IBM NetVista Computer
system board.
install them on the new system board.
v Memory modules
jumper settings.
Important:
Make sure the fansink and air baffle (if any) are installed to prevent processor
1.
overheating.
If the processor is not installed correctly, the system board and the processor can be
2.
damaged.