Verifying The Configuration; Feature Configuration - Cisco ASR 5000 Series Administration Manual

▀ Verifying the Configuration

Verifying the Configuration
You can use a number of commands to verify the configuration of your feature, service, or system. Many are
hierarchical in their implementation and some are specific to portions of, or specific lines in, the configuration file.

Feature Configuration

In many configurations, you have to set and verify specific features. Examples include APN and IP address pool
configuration. Using these examples, enter the following commands to verify proper feature configuration:
show apn all
The output displays the complete configuration for the APN. In this example, an APN called apn1 is configured.
access point name (APN): apn1
authentication context: test
pdp type: ipv4
Selection Mode: subscribed
ip source violation: Checked drop limit: 10
accounting mode: gtpp No early PDUs: Disabled
max-primary-pdp-contexts: 1000000 total-pdp-contexts: 1000000
primary contexts: not available total contexts: not available
local ip: 0.0.0.0
primary dns: 0.0.0.0 secondary dns: 0.0.0.0
ppp keep alive period : 0 ppp mtu : 1500
absolute timeout : 0 idle timeout : 0
long duration timeout: 0 long duration action: Detection
ip header compression: vj
data compression: stac mppc deflate compression mode: normal
min compression size: 128
ip output access-group: ip input access-group:
ppp authentication:
allow noauthentication: Enabled imsi
▄ Cisco ASR 5000 Series Femto Network Gateway Administration Guide
52
Verifying and Saving Your Configuration
OL-24872-01