Table of Contents
Advertisement
Programming
System Send_Commands (Cont.)
Command
'RO',<offset>
'SP',<IR out>'
XCH <Channel>
14
Description
Sets the offset value subtracted from the IR function before sending
the code to the AXC-EM.
Syntax:
"'RO',<offset>"
Variables:
Offset = 0 through 255
Example:
SEND_COMMAND AXBTMX,"'RO',5"
Subtracts 5 from the incoming IR code number and sends the
appropriate IR function from the AXB-TM5 to the control system.
Generates a single <IR out> function pulse.
Syntax:
"'SP',<IR out>'"
Variables:
IR out = 1 through 127.
The 'CTON' sets pulse length and 'CTOF' sets time between pulses.
Example:
SEND_COMMAND AXBTMX,"'SP',25"
Pulses IR code 25 which decreases the volume level on the
equipment connected to the AXB-TM5.
Transmit the IR code in the format set with the XCHM mode
command.
Syntax:
SEND_COMMAND <DEV>,'XCH <Channel>'
Variable:
<Channel> = 0 through 999
AXB-TM5 Television Manager
Advertisement
Table of Contents
