Setting Up The Device - Fujitsu ESPRIMO E4xx Operating Manual

Getting started

Setting up the device

Device, Ergonomic Videoworkstation
You can set up and operate the device in either a vertical or horizontal position.
When installing your device, please read the recommendations and
safety notes in the "Safety" manual.
Use the device simply in the horizontal operating position. With the aid of suitable
feet, it is also possible to use the device in the vertical operating position..
We recommend that you place your device on a surface with good anti-slip qualities.
In view of the multitude of different finishes and varnishes used on furniture, it is
possible that the rubber feet will mark the surface they stand on.
Depending on the location of your device, bothersome vibrations and noises may
occur. To prevent this, a distance of at least 10 mm / 0.39 inch should be maintained
from other devices on casing sides without ventilation surfaces.
To ensure the casing receives adequate ventilation, when setting up the
device make sure that there is sufficient clearance around it as indicated
in the chapter
In order to avoid overheating, do not cover the ventilation areas
of the monitor or the device.
Do not stack several devices on top of each other.
A minimum distance of 200 mm / 7.87 inch from the device must
be observed for ventilation areas.
Do not expose the device to extreme ambient conditions (see
Page 55, "Ambient conditions"). Protect the device against dust, humidity and heat.
14
"Technical specification", Page 55.
"Technical specification",
Fujitsu