Ports On The Device; Connecting A Monitor - Fujitsu ESPRIMO E4xx Operating Manual

Ports on the device

Interfaces Device, Externaldevices,
The ports are located on the front and back of the device. The ports available on your
device depend on the configuration level you have selected. The standard ports are
marked with the symbols shown below (or similar). Detailed information on the location
of the ports is provided in the manual for the mainboard.
Serial interface, turquoise
Serialinterface
VGA monitor port, blue
Monitorport
Headphones port
Headphones
USB - Universal Serial Bus,
black
USB 3.0 - Universal Serial
Bus, blue
UniversalSerialBus
PS/2 mouse port, green
Mouseport PS/2mouseport
DVI monitor port
Monitorport
Some of the connected devices require special drivers (see the
documentation for the connected device).

Connecting a monitor

► Follow the instructions contained in the monitor manual to prepare the monitor
for operation (e.g. connecting cables).
Monitor
► Connect the data cable of the monitor into the monitor port of your device.
The monitor power cable may only be connected to the monitor socket of the
device if the monitor current consumption is less than 1 A at 240 V or 2 A at 100 V.
The values for the monitor current consumption can be found in the technical
data on the monitor or in the operating manual for the monitor.
► Depending on the configuration level of your device, plug the monitor power
cable into the grounded mains outlet.
Fujitsu
Microphone jack
Microphoneport
Audio input (Line In)
Linein Audioinput
Audio output (Line Out)
Lineout Audiooutput
LAN port
LAN
LANport
PS/2 keyboard port, purple
Keyboardport
DP DisplayPort
Getting started
19