Site (-Site) - HP NonStop Data Transformation Engine FTP Adapter Reference Manual

Chapter 3 - FTP Commands
Option
number
Note If you want the maximum number of files retrieved in burst mode to be infinite,
then you must set the
on the command line. The
must be used in conjunction with the

Site (-SITE)

Use the Site adapter command (
command to the FTP server software.
-SITE 'command_text'
Option
'command_text'
For example:
-SITE 'namefmt=1'
sends the
NAMEFMT
transferred.
To see what commands are accepted by the server use a BSD-based command
line client (typically the FTP command installed with your Windows or UNIX
operating system) and log in to the server and type the following from the
prompt:
quote HELP SITE
Note The command specified by
Description
The number of files to be retrieved by the adapter.
command option
–QTY
command is currently unsupported, however, it
–LSN
–QTY
-SITE
Description
Specify the FTP-server-specific site command
(enclosed in single quotes) to send to the FTP server
software
command to an AS/400 FTP server before files are
or
quote SITE HELP
is executed prior to the files being transferred.
-SITE
F T P A d a p t e r R e f e r e n c e G u i d e
2 5
to '
number S
command in this scenario only.
) to send an FTP server specific site
.
List of Commands
' and specify "
-LSN 0
ftp>
"