Adapter Behavior When -Firewall Command Present - HP NonStop Data Transformation Engine FTP Adapter Reference Manual

Chapter 3 - FTP Commands
Option
Note
TRANSPARENT
other methods connect to the firewall. See the
for more information on the FTP variables shown in the
column.
Example
The following command uses the
proxy server fire (no port specified) with a user name of jbond and password of
007:
-FW FTP://jbond:007@fire/userlogon
See URL Syntax

Adapter Behavior when -FIREWALL Command Present

A firewall is used in order to isolate (restrict) some computers from reaching other
computers.
If a firewall comes into discussion, only a small part of the FTP adapter is aware of
the presence of the firewall.
Description
SITE
USER fw_user, PASS fw_pass, SITE
ftp_host,
USER ftp_user, PASS ftp_pass
TRANSPARENT USER fw_user, PASS fw_pass, USER
ftp_user,
PASS ftp_pass
USER
USER ftp_user@ftp_host, PASS ftp_pass
USERFW
USER ftp_user@ftp_host fw_user,
PASS ftp_pass
USERFWPASS USER ftp_user@fw_user@ftp_host,
PASS ftp_pass@fw_pass
USERLOGON or
USER fw_user, PASS fw_pass,
USER ftp_user@ftp_host, PASS ftp_pass
USER
USERLOGONFW or
USER fw_user@ftp_host, PASS fw_pass,
USER ftp_user, PASS ftp_pass
USERFW
is the only method that directly connects to the FTP server; all
and URL Encoding
F T P A d a p t e r R e f e r e n c e G u i d e
FTP URL
or
(
USERLOGON USER
for more information.
1 5
List of Commands
( ) adapter command
-URL
Connection Information
method to connect to the
)