Private Key (-Pkey); Private Key Password (-Kpass); Quantity (-Qty) - HP NonStop Data Transformation Engine FTP Adapter Reference Manual

Chapter 3 - FTP Commands
By default, the adapter first tries to connect using passive mode; see the Passive
Mode adapter command (
During a port mode connection, the adapter listens for the connection and dictates
where the server is to connect.
-PORT

Private Key (-PKEY)

The Private Key adapter command (
private key (if used).
-PKEY filename
Option
filename

Private Key Password (-KPASS)

Use the Private Key Password adapter command (
password for the client private key (if password protected).
-KPASS password
Option
password

Quantity (-QTY)

Use the Quantity command (
by the adapter.
If you are running in burst mode, each burst may return less than –
messages, but the total number of messages returned by the adapter will not
exceed the value specified by the
If not specified, the default quantity is the FetchUnit size of the burst.
-QTY
). If the adapter is unsuccessful, it uses port mode.
-PV
Description
Specify the file containing the client private key.
Description
Specify the password for the client private key.
-QTY
number
F T P A d a p t e r R e f e r e n c e G u i d e
) specifies the file containing the client
-PKEY
-KPASS
) to capture the number of files to be retrieved
command.
–QTY
2 4
List of Commands
) to specify the
QTY