Table of Contents
Advertisement
Chapter 3 - FTP Commands
SSL Encryption Strength (-STR)
The SSL Encryption Strength (-STR) command can be either WEAK (only use
weak algorithms) or STRONG (only use strong algorithms). If not specified, any
available algorithm is used (if STRONG is not available then WEAK is used). If the
export version of the libraries is used, only weak algorithms are available and this
command is ignored.
-STR {WEAK|STRONG|ANY}
Option
STRONG
WEAK
ANY
SSL Protocol (-SPROTO)
Use the SSL Protocol adapter command (-SPROTO) to set the Secure Socket Layer
(SSL) protocol level. SSL enables the adapter to process FTPS URLs. If -SPROTO is
not specified, the SSL Protocol defaults to SSLv23.
-SPROTO {SSLv2|SSLv3|SSLv23|TLSv1}
Option
SSLv2
SSLv3
SSLv23
TLSv1
Stage (-STG or -STAGE)
Use the Stage adapter command (
To specify that uploaded data should be staged in a temporary or shadow file.
To prevent partial updates of a file to be transferred. This is especially
important if the FTP server processes uploads in an automated fashion.
Description
Use strong (non-exportable) encryption only.
Use exportable encryption only.
Use any available encryption.
Description
Specify SSL protocol version 2.
Specify SSL protocol version 3.
Specify SSL protocol version 2 or version 3.
Specify Transport Layer Security (TLS) protocol version 1.
-STG
F T P A d a p t e r R e f e r e n c e G u i d e
2 6
or
) to accomplish the following:
-STAGE
List of Commands
Advertisement
Table of Contents
