Chapter 2 - Command Alias
Specify adapter commands by using a command string on the command line or by
creating a command file that contains adapter commands. The command syntax
is:
-IA
[alias]card_num
-OA
[alias]card_num
In the command syntax,
and
is the Output Target Override execution command, alias is the adapter
-OA
alias, and card_num is the number of the map card. The FTP adapter alias and
corresponding execution commands are listed below.
Adapter
FTP
is the Input Source Override execution command
-IA
Alias
As Input
FTP
-IAFTPcard_num
F T P A d a p t e r R e f e r e n c e G u i d e
As Output
-OAFTPcard_num
8