Url Syntax - HP NonStop Data Transformation Engine FTP Adapter Reference Manual

Chapter 3 - FTP Commands
USER ftp_user@ftp_host fw_user
PASS ftp_pass
USER ftp_user
PASS ftp_pass
USERFWPASS
Establish a Socket connection to the firewall host
Issue the following command over the connection in this order:
USER ftp_user@fw_user@ftp_host
PASS ftp_pass@fw_pass
USERLOGON
Establish a Socket connection to the firewall host
Issue the following command over the connection in this order:
USER fw_user
PASS fw_pass
USER ftp_user@ftp_host
PASS ftp_pass USER
USERLOGONFW
Establish a Socket connection to the firewall host
Issue the following command over the connection in this order:
USER fw_user@ftp_host
PASS fw_pass
USER ftp_user
PASS ftp_pass

URL Syntax

Because the syntax for the rest of the URL varies depending on the scheme
selected, URL schemes that involve the direct use of an IP-based protocol for a
specified host on the Internet use a common syntax for the scheme-specific data:
//user:password@host:port/url_path
Some or all parts of
be excluded. The scheme-specific data starts with a double slash (
that it complies with the common Internet scheme syntax. The different
components obey the following rules:
or
USER
or
USERFW
user:password@
F T P A d a p t e r R e f e r e n c e G u i d e
, ,
:password :port
1 7
List of Commands
, and may
/url_path
) to indicate
//