Firewall Connection Method Url (-Fw Or -Firewall) - HP NonStop Data Transformation Engine FTP Adapter Reference Manual

Chapter 3 - FTP Commands

Firewall Connection Method URL (-FW or -FIREWALL)

If required for connection, use the Firewall Connection Method URL (
) command to specify the URL for the proxy server (firewall). One of the
FIREWALL
following connection methods must be specified:
OPEN
SITE
TRANSPARENT
USER
USERFW
USERFWPASS
USERLOGON
USERLOGONFW
-FIREWALL FTP://[fw_user[:fw_pass]@][fw_host[:fw_port]]/method
Option
fw_user
:
fw_pass
fw_host
:
fw_port
/method
or
USER
or
USERFW
Description
Specify the user name to connect to the proxy server. Unless you
are also specifying a password, this parameter must be followed by
if you specify
@ fw_host
Specify the password that authenticates the user name. This
parameter must be followed by
.
fw_host
The name (or address) of the proxy server to which to connect.
The name (or number) of the port to use for connection.
Required value. The method dictates how the firewall connection is
established based on a combination of the connection information
provided using
–FIREWALL
FTP URL). Select one of the following Methods, which specifies the
corresponding Connection Information.
Method Connection Information
OPEN OPEN ftp_host, USER ftp_user, PASS
ftp_pass
F T P A d a p t e r R e f e r e n c e G u i d e
.
if you are also specifying
@
(for proxy server URL) and
1 4
List of Commands
or
-FW -
(for
–URL