Switching The Wireless Components On And Off; Wlan/Wi-Fi And Bluetooth; Registration In A Wlan/Wi-Fi Network; Umts / Lte - Fujitsu STYLISTIC M702 Operating Manual

Switching the wireless components on and off

WLAN/Wi-Fi and Bluetooth

► Select Settings.
► Set the switch for WLAN/Wi-Fi or Bluetooth to ON.
► Click on WLAN/Wi-Fi and select your preferred network.
► Click on Bluetooth and select the Bluetooth device with which you would
like to connect your Tablet PC.
Pay attention to the additional safety notes for devices with radio components
provided in the "Safety/Regulations" manual.

Registration in a WLAN/Wi-Fi network

If your wireless access point (router) supports AOSS™ or WPS, you can easily
connect to your WLAN/Wi-Fi network.
► Go to All Apps, select Settings – Simple WLAN Registration and choose AOSS
System or WPS System accordingly.
► If you choose the AOSS System, press the AOSS button at the access point.
or
► If you choose the WPS System, check which of the following methods is supported
by your access point, and make the relevant settings.
• Button system (automatic registration by pressing a button at the access point)
• PIN input system, eight-digit (automatic registration through input of a randomly
generated, eight-digit PIN at the access point)
• PIN input system, four-digit (automatic registration through input of a randomly
generated, four-digit PIN at the access point)
At some wireless access points, it is not possible to establish an AOSS™ connection.
Use WPS if the connection fails, or establish the connection manually.
If the security function at the access point is set to WEP, you cannot
establish a connection via WPS.
In the AOSS™ system, only frequency 2.4 GHz is supported.

UMTS / LTE

► Select Settings - Next... - Mobile Networks.
► Choose your preferred network.
Fujitsu
Working with the Tablet PC
31