Wireless Lan / Bluetooth / Lte / 4G Wireless Components; Switching The Wireless Components On And Off; Configuring Wlan Access; Further Information On Wlan And Bluetooth - Fujitsu STYLISTIC Q508 Manual

Wireless LAN / Bluetooth / LTE / 4G
wireless components
The installation of radio components not approved by Fujitsu will invalidate
the certifications issued for this device.

Switching the wireless components on and off

The wireless components are switched on and off using the appropriate
functions of the operating system.
► To switch wireless components on and off individually, select Settings –
Network & Internet – Airplane Mode.
Configuring WLAN access
• Requirement: A WLAN is available and you have the necessary access data on hand.
Information on configuring WLAN access can be found in the
documentation for your operating system.

Further information on WLAN and Bluetooth

For further information about WLAN or Bluetooth, please refer to the
appendix of this Operating Manual.
For WLAN specifications, see chapter

Access via 4G / LTE

The embedded WWAN module option is not available for all products in all regions and
requires network support as well as a separately purchased cellular radio contract.
Please contact your cellular radio network provider about network coverage
and availability. Connection speeds vary according to location, surroundings,
network connections and other factors.
You can find information on setting up an Internet connection with the 4G network
in the hardware documentation (the Quick Start Guide).
The device has a 4G Sierra Wireless Air Prime EM7455B wireless WAN module.
Fujitsu
"WLAN specifications", Page
Working with the Tablet PC
84.
43