Wireless Lan / Bluetooth / Lte Radio Components (Configuration Dependent); Switching The Wireless Components On And Off; Setting Up Wlan Access; Access Via Lte - Fujitsu STYLISTIC V727 Operating Manual

Wireless LAN / Bluetooth / LTE radio components
(configuration dependent)
The installation of radio components not approved by Fujitsu will invalidate
the certifications issued for this device.

Switching the wireless components on and off

wireless components are switched on and off via the corresponding functions of the operating system.
► To switch wireless components on and off individually, select Settings – Change
PC settings – Network – Airplane mode.

Setting up WLAN access

• Requirement: A WLAN must be available and you must have the
corresponding access information.
Information on configuring the WLAN access can be found in the
documentation for your operating system.

Access via LTE

If you ordered an integrated LTE module with your system, you can fully enjoy optimum
reception and maximum energy efficiency without the hassle of cables or antennae.
An installed LTE module is ready for immediate use.
If you did not order an LTE module, you can purchase the accessories for LTE reception
from your retailer or your Fujitsu Technology Solutions dealer.
For information about connecting with the LTE network, please see the documentation
for the hardware that you will be using.
You can connect your device to the internet via LTE. To do this, use one
of the following connection types:
• Integrated LTE module (the type depends on your model variant)
• a USB dongle (a USB stick with your mobile phone provider's SIM card)
• a mobile end-device (e.g. mobile phone with Bluetooth or cable connection)
Fujitsu
Working with the Tablet PC
37