Connecting External Devices; Connecting Usb Devices - Fujitsu STYLISTIC M702 Operating Manual

Connecting external devices

Connecting external devices
Under all circumstances, please observe the safety notes provided in the
"Important notes", Page 11
any devices to or from your Tablet PC.
Always read the documentation supplied with the device you wish to connect.
Never connect or disconnect cables during a thunderstorm.
Never pull at a cable when disconnecting it. Always grasp the plug.
Adhere to the order described below when you connect external devices
to the Tablet PC or separate them from it:
With some devices, such as USB devices, it is not necessary to switch off
the Tablet PC and the device before connecting/disconnecting. For more
information about whether or not devices need to be switched off, please refer
to the documentation supplied with the external device.

Connecting USB devices

USBports
Your Tablet PC has a micro USB port. Using the USB cable supplied, you can connect your Tablet
PC to a notebook or desktop PC for data exchange. With a commercially available USB-OTG
adapter, you can connect input devices such as a keyboard and mouse as well as mass memories
such as Flash memory sticks. Check the manual to see if your device is supported by Android.
USB devices are hot-pluggable. This means you can connect and disconnect
devices while your operating system is running.
USB 2.0 has a data transfer rate of up to 480 Mbit/s.
Additional information can be found in the documentation for the USB devices.
Device drivers
USB devices will be automatically recognised and installed by your operating system.
68
chapter before connecting or disconnecting
► Connect the data cable to the
external device.
► Connect the data cable to the USB
port on the Tablet PC.
Fujitsu