Switching The Wireless Components On And Off; Configuring Wlan Access; Further Information On Wlan And Bluetooth; Access Via 4G - Fujitsu Lifebook T937 Operating Manual

Working with the notebook

Switching the wireless components on and off

► Press the key
Bluetooth Bluetooth WirelessLAN WirelessLAN
The wireless component indicator will illuminate when one or more wireless
components are switched on.
The Bluetooth 4G modules and the wireless LAN transmission unit (antenna) will
all be switched off when you switch off the wireless components.
Pay attention to the additional safety notes for devices with wireless components
provided in the "Safety/Regulations" manual.
Details on using a wireless LAN can be found in the online help system
included in the wireless LAN software.
You can obtain more information on 4G from your service provider.
Configuring WLAN access
• Requirement: A WLAN is available and you have the necessary access data to hand.
Information on configuring WLAN access can be found in the
documentation for your operating system.

Further information on WLAN and Bluetooth

For further information about WLAN or Bluetooth, please refer to the
appendix of this Operating Manual.
For WLAN specifications, see chapter

Access via 4G

If you have ordered an integrated 4G module with your system, your device
is ready for use straight away.
You can find information on establishing the connection with the 4G network
in the documentation for the hardware used.
Your device can connect with the Internet via 4G. To do this, use one of
the following types of connection:
• Integrated 4G module (availability dependent on model variant)
• USB dongle (a USB stick containing a SIM card from your cellular phone network provider)
• A mobile end-device (e.g. cellular phone with Bluetooth or cable connection)
58
F5 to switch the wireless components on and off.
"WLAN specifications", Page 98.
Fujitsu