Nfc (Near Field Communication) And Android Beam; Activating Nfc And Android Beam; Transferring Contents Via Nfc / Android Beam - Fujitsu STYLISTIC M702 Operating Manual

NFC (Near Field Communication) and Android Beam

You can transfer the screen content directly by approaching the NFC
sensors of NFC-compatible devices.

Activating NFC and Android Beam

► To use Android Beam, first set the Android Beam function to ON.
► Go to All Apps, select Wireless & Networks – Next... and activate NFC. Then select
Android Beam and switch it to ON in the top right corner.
Android Beam is not supported by some applications. The data that is sent or
received depends on the application.
Data transfer is not secure on all Tablet PCs equipped with Android Beam.

Transferring contents via NFC / Android Beam

► Activate Android Beam on all systems.
► Open a website or card which you wish to transfer to the other system.
► Bring the NFC sensors on the two systems close to each other.

When the systems have detected each other, a signal will sound, the screen content of the
transmitting device will be zoomed out and a prompt to Tap for transfer will appear.
► Tap on the screen content to transfer it to the other device.

The content of the transmitting device is transferred and appears on the
monitor of the receiving device.
When the battery is being charged, or if the Tablet PC is connected via the
micro USB port, NFC and Android Beam are not supported.
If the NFC mark cannot be scanned even with it held close to the compatible device,
lift the device slightly or move it forwards/backwards or left/right.
In some cases, the NFC sensor cannot be detected if there is a metal object
between the sensor and the compatible device. Please also note that a pocket or
cover for your Tablet PC can impair communication capabilities.
Fujitsu
Working with the Tablet PC
33