Table of Contents
Advertisement
address setting. As the router assign the DNS settings to the DHCP-client-enabled
PC.
5.
Q: BRC70X couldn't save the setting after click on Apply button?
A: BRC70X will start to run after the setting finished applying, but the setting isn't
written into memory. Here we suggest if you want to make sure the setting would be
written into memory, please reboot the device via Reboot under System
Management directory.
6.10 Support
1.
Q: What is the maximum number of IP addresses that the XDSL Router will
support?
A: The Router will support to 253 IP addresses with NAT mode.
5. Q: Is the Router cross-platform compatible?
A: Any platform that supports Ethernet and TCP/IP is compatible with the Router.
6.11 Others
1.
Q: Why does the router dial out for PPPoE mode very often?
A: Normally some of game, music or anti-virus program will send out packets that
trigger the router to dial out, you can close these programs. Or you can set the idle
time to 0, then control to dial out manually.
2.
Q: What can I do if there is already a DHCP server in LAN?
A: If there are two DHCP servers existing on the same network, it may cause conflict
and generate trouble. In this situation, we suggest to disable DHCP server in router
and configure your PC manually.
http://www.sapido.com.tw/
User Manual v1.0.0
Advertisement
Table of Contents
