Table of Contents
Advertisement
Default Gateway
DHCP
DHCP Client Range
Device Name
802.1d Spanning Tree
Clone MAC Address
5.2.3
DDNS
You can assign a fixed host and domain name to a dynamic Internet IP address. Each time
the router boots up, it will re-register its domain-name-to-IP-address mapping with the DDNS
service provider. This is the way Internet users can access the router through a domain
name instead of its IP address.
Note: make sure that you have registered with a DDNS service provider before enabling this feature.
http://www.sapido.com.tw/
Input ISP Default Gateway Address. If you don't know, please
check with your ISP.
Enable or disable DHCP services. The DHCP server will
automatically allocate an unused IP address from the IP address
pool to the requesting computer if enabled.
Define the DHCP client range and then the DHCP server will
assign an IP to the requesting computer from this range. The
Show Client will display every assigned IP address, MAC
address, and expired time. The default range is 192.168.1.100 -
192.168.1.200.
The default is 11N_Broadband_Router 。
IEEE 802.1d Spanning Tree Protocol (STP) is a
network protocol
that ensures a loop-free
LAN. The main purpose of STP is to ensure that you do not create
loops when you have redundant paths in your network. Loops are
deadly to a network.
Copy the MAC address from the device you had registered to your
ISP if your ISP asks for the specific MAC Address.
link layer
topology
for any
bridged
User Manual v1.0.0
Advertisement
Table of Contents
