Sapido BRC70x User Manual page 12

NOTE: If the IP address of Gateway is not displayed, or the address followed by 'IP Address' begins with
"169.x.x.x", please recheck network connection between your computer and router, and / or go to the
beginning of this chapter, to recheck every step of network setup procedure.
2.4.1 Log into Web GUI
After your computer obtained an IP address from router, please start your web browser, and
input the IP address of the router in address bar, and the following message should be
shown. Please click "admin" to login the BRC70X.
Enter the User name and Password in to the blank and then Click Login. The default values
for User Name and Password are admin (all in lowercase letters).
Users can set or change user name and password used for accessing the web management
interface in this section.
http://www.sapido.com.tw/ User Manual v1.0.0