Table of Contents
Advertisement
5.
Select Direct connection to the Internet and click on OK button.
6.
Click on OK button.
3.
Q:
Web page hangs, corrupt downloads, or nothing but junk characters is being
displayed on the screen. What do I need to do?
A: Force your NIC to 10Mbps or half duplex mode, and turn off the "Auto-negotiate"
feature of your NIC as a temporary measure. (Please look at the Network Control
Panel, in your Ethernet Adapter's Advanced Properties tab.)
4.
Q: Why can't I connect to the Web Configuration?
A: you can remove the proxy server settings in your web browser.
6.9
Setup
BRC70X
1.
Q: Why does BRC70X's setup page shut down unexpectedly?
A: If one of the pages appears incompletely in BRC70X 's setup pages, please click on
Logout item on the Main Menu before shutting it down. Don't keep it working. Then,
close Internet browser and open it again for going back to the previous page.
2.
Q:
I don't know how to configure DHCP.
A: DHCP is commonly used in the large local network. It allows you to manage and
distribute IP addresses from 2 to 254 throughout your local network via BRC70X.
Without DHCP, you would have to configure each computer separately. It's very
troublesome. Please Open Internet browser > Input 192.168.1.1 in the website
blank field > Select DHCP Server under the IP Config Menu. For more
information, please refer to 3.3.2 (Router Mode) or 4.3.1 (AP Mode).
3.
Q: How do I upgrade the firmware of BRC70X ?
A: Periodically, a new Flash Code is available for BRC70X on your product supplier's
website. Ideally, you should update BRC70X's Flash Code using Firmware
Upgrade on the System Management menu of BRC70X Settings.
4.
Q: Why is that I can ping to outside hosts, but cannot access Internet websites?
A: Check the DNS server settings on your PC. You should get the DNS servers
settings from your ISP. If your PC is running a DHCP client, remove any DNS IP
http://www.sapido.com.tw/
User Manual v1.0.0
Advertisement
Table of Contents
