Pictgraph Illustration And Explanation - Hitachi VB 16Y Safety Instructions And Instruction Manual

PICTGRAPH ILLUSTRATION AND EXPLANATION

Read handling
instructions before
use.
Begin operation only after
ensuring that there are no
people within the turning
range of the material to
be bent.
(Returning Halfway)
1 Select RETURN with the dial.
2 Pull the triger.
Do not this electric
power tools in wet
wether conditions.
Never bring your
hand close to the
cutter during
operation.
If the switch is turned off and then
immediately turned on again, the
motor may not start. Wait for at least
one full second before attempting to
turn the motor on again after it has
been switched off.
Avoid any work exceeding the
maximum capacities.
(Rebar diameter: #5 (5/8"))
(Selecting the rebar size)
Select the rebar size and
the bending angle.
English
13