Craftmade Union UN52 Installation Instruction
  1. Manuals
  2. Brands
  3. Craftmade Manuals
  4. Fan
  5. Union UN52
  6. Installation instruction
Craftmade Union UN52 Installation Instruction

Craftmade Union UN52 Installation Instruction

Union ceiling fan
Hide thumbs
1
2
3
4
5
6

Advertisement

Table of Contents

P.O. Box 1037
650 S. Royal Lane, Suite 100
Coppell, TX 75019
(800) 486-4892
8:00 to 5:00 CST (Central Standard Time)
Toll Free Fax: (877) 304-1728
email: customerservice@craftmade.com
www.craftmade.com
P. O. Box 1037
650 S. Royal Lane, Suite 100
Coppell, TX 75019 EE.UU.
(800) 486- 4892
8:00 a 5:00 CST (Hora local central)
Número de fax sin cargo: (877) 304-1728
Correo electrónico: customerservice@craftmade.com
www. craftmade.com
P. O. Box 1037
650 S. Royal Lane, Suite 100
Coppell, TX 75019 EE.UU.
de 8 heures à 17 heures (Heure standard du centre)
Numéro de télécopieur gratuit : (877) 304-1728
Email: customerservice@craftmade.com
www. craftmade.com
4
Union Ceiling Fan

Installation Instructions

Instrucciones de instalación
Instructions d'installation
5

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Union UN52 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Craftmade Union UN52

Summary of Contents for Craftmade Union UN52

  • Page 1: Installation Instructions

    Coppell, TX 75019 EE.UU. (800) 486- 4892 8:00 a 5:00 CST (Hora local central) Número de fax sin cargo: (877) 304-1728 Installation Instructions Correo electrónico: customerservice@craftmade.com www. craftmade.com Instrucciones de instalación Instructions d’installation P. O. Box 1037 650 S. Royal Lane, Suite 100 Coppell, TX 75019 EE.UU.

  • Page 2: Troubleshooting

    Read and Save ese Safety Precautions Before Assembly 1. Turn off electricity at main switch before wiring or servicing fan in order to avoid possible electrical shock. 1. Make sure that the fan voltage (120) is compatible with your own electrical system. 2.

  • Page 3: Installing Mounting Bracket

    Installing Mounting Bracket Turn off circuit breakers and wall switch to the fan supply line leads. Important: When using an existing outlet box, be sure the box is Preparation securely attached to the building structure and can support the full Support Beam weight of the fan.
  • Page 4 Downrod Assembly read the downrod onto the motor housing making sure the wires don’t get twisted. Locate downrod assembly (#2). Loosen ball screw on black hanging ball to free Insert saftey bolt (S5) through flange & downrod lock pin. Black hanging ball will slide down. Remove ground screw and green and attach nut.
  • Page 5 Place flange cover, downrod accessory, anti-sway adapter and canopy in order over downrod assembly. WARNING: Failure to completely tighten downrod as described in steps Lift fan onto the mounting bracket (#1). Turn housing until hanging ball seats above could result in the fan loosening and possibly falling. itself into ball socket (listen for click).
  • Page 6 Remove one of the 3 set screws on the mounting ring and loosen the other two screws. Do not remove. While holding the light kit assembly under your fan, snap together the wire connection plugs. Align the key holes of the mounting plate with the loosened screws and tighten all 3 screws securely.

Table of Contents