Hiniker 1852 Operator's Manual page 21

18. Locate three blue connector splices in the
hardware bag in the plow's parts box.
Using a blue splice, crimp the single brown
wire from the underhood harness into the
vehicle's driver's side parking light wire.
Using a blue splice, crimp the single yellow
wire from the underhood harness into the
vehicle's driver's side turn signal wire.
19. Select the proper headlight adapter for your
20. Secure all cables away from hot or moving
DWG NO. 4165
Using a blue splice, crimp the single green
wire from the underhood harness into the
vehicle's curbside turn signal wire.
vehicle, specific instructions are included
with each kit.
The headlight adapter kit consists of two
identical adapters. Install the adapters ac-
cording to the instructions included with the
kit and connect to the 5-pin connectors of
the underhood wiring harness.
components with cable ties.
This completes the Electrical Installation.
V-Plow Assembly 19
DWG NO. 5295