Percent Weighing; Parts C Ounting - Intelligent Weighing Technology TB Series User's Operation Manual

4.4 PERCENT WEIGHING

The scale will allow a sample weight to be shown as 100%. Then any other weight
placed on the scale will be displayed as a percentage of the original sample. For
example if 350g is placed on the scale and the % key is pressed the display will
show 100.00%.
If you remove the 350g weight and put a 300g weight on the scale the display will
show 85.71%, as 300g is 85.71% of 350g.
Note: the scale may jump by large numbers unexpectedly if small weights are used to
set the 100% level. For example if only 23.5g is on a scale with 0.5g increments
and the scale is set to 100%, the display will show 100.00%, however a small
change of weight will cause the display to jump to 102.13% as one scale division
(0.5g)
Pressing the % key will return the scale to weighing.
4 . 5 P A R T S C O U N T I N G
When the scale is in the weight mode, pressing the SMPL key will start the
parts counting function.
Before beginning, tare the weight of any container that will be used, leaving the
empty container on the scale. Place the number of samples on the scale. The
number should match the options for parts counting, 10, 20, 50, 100 or 200
pieces.
Press the SMPL key to begin. The scale will show "SP 10" asking for a sample
size of 10 parts. The display will cycle through the options: 10, 20, 50, 100, 200
and back to 10.
Press the SMPL key again when the number matches the number of parts used
for the sample. As more weight is added the display will show the number of
parts (pcs).
Press the MODE key to display unit weight (g/pcs), Total weight (kg) or the
count (pcs). Press the SMPL key to return to normal weighing.