Esc/Pos Mode Commands (Tm-290 Emulation) - Star SP298 SERIES User Manual

ESC/POS Mode Commands (TM-290 emulation)

The following table lists the TM-290 emulation commands that are supported
by this printer.
Control Codes
<HT>
<LF>
<FF>
<ESC> SP
<ESC> !
<ESC>#
<ESC> *
<ESC> 2
<ESC> 3
<ESC> @
<ESC> D
<ESC> M
<ESC> P
*1: n/60-inch line spacing and paper feed commands:
Since the minimum paper feed pitch for this printer is 1/144 inch, n/60 inch can
considered an approximate value. However, the actual value is INT ((6n/5) +
0.5)/72 inch.
Hexadecimal
Codes
09 Horizontal tab
0A Line feed
0C Paper eject in single sheet mode
1B 20 Sets size of space to right of character
1B 21 Enables batch print mode
1B 23 Sets memory switch
1B 2A Selects bit image mode
1B 32 Selects 1/6-inch line spacing
1B 33 Selects approximate n/60-inch line spacing *1
1B 40 Initializes the printer
1B 44 Sets horizontal tab position
Selects the 7 × 9 font
1B 4D
Selects the 5 × 9 font
1B 50
Function
28