Star SP298 SERIES User Manual page 126

123
Print Position
Paper Feed
Drive
Pitch
Speed (while printing)
Speed (while ejecting)
Important!
Slip paper must be flat, smooth, and free of curls, bends, wrinkles and folds, all
of which can cause jamming and soiling by ink.
Do not use paper with perforations within the shaded area. Perforations may cause the
paper sensor to erroneously report an out of paper condition.
Stepping motor
Star Mode: Adjustable in 1/144" units
ESC/POS Mode: Adjustable in n/60" units (approximate)
3.5" per second
4.5" per second
8 mm
No holes in this area