Installing The Backup Battery - Canon MV650i Instruction Manual

2_D73PAL_E(13-42) 02.12.26 9:22 PM Page 17

Installing the Backup Battery

The backup battery allows the camcorder to retain date, time and other camcorder
settings while the power source is disconnected. Power the camcorder from a
household power source or with a battery pack when replacing the backup battery.
1. Open the backup battery cover.
2. Insert the lithium battery with the
+ side facing outward.
3. Close the cover.
WARNING!
• The battery used in this device may present a fire or chemical burn hazard if
mistreated. Do not recharge, disassemble, heat above 100° C or incinerate the
battery.
• Replace the battery with a CR1616 made by Panasonic, Hitachi Maxell, Sony, Toshiba,
Varta or Renata. Use of other batteries may present a risk of fire or explosion.
• The used battery should be returned to the supplier for safe disposal.
❍ Do not pick up the battery using tweezers or other metal tools as this will
cause a short circuit.
❍ Wipe the battery with a clean dry cloth to ensure proper contact.
❍ Keep the battery out of reach of children. If it is swallowed, seek medical
assistance immediately. The battery case may break and the battery fluids may
damage stomach and intestines.
❍ Do not disassemble, heat or immerse the battery in water, to avoid the risk of
explosion.
The backup battery has a life span of about a year. j flashes to inform you that
Downloaded From VideoCamera-Manual.com Manuals it needs to be replaced.
q w e
E
17