Table of Contents
Advertisement
Trango Systems, Inc
WARNING:
Intentional or unintentional changes or modifications must not be made unless under the express consent of the
party responsible for compliance. Any such modifications could void the user's authority to operate the equipment
and will void the manufacturer's warranty. To comply with RF exposure requirements, the following antenna
installation and device operating configurations must be satisfied. The antenna for this unit must be fixed and
mounted on outdoor permanent structures with a separation distance of at least two meters from all persons.
Furthermore, it must not be co‐ located or operating in conjunction with any other antenna or transmitter.
Industry Canada Information
IC: 2945A‐P5055M
Information for P5055M‐EXT‐IC
This device has been designed to operate with the antennas listed below, and having a maximum gain of 34
dBi. Antennas not included in this list or having a gain greater than 34 dBi are strictly prohibited for use with
this device. The required antenna impedance is 50 ohms.
Approved Antennas:
Radiowaves model : SPD4‐5.2
Radiowaves model : SPD3‐5.2
Radiowaves model : SPD2‐5.2
Radiowaves model : SPD1‐5.2
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that
the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful
communication.
Warranty Information
Radios from Trango Systems are warranted for one year from date of purchase. Please see
www.trangobroadband.com for a complete description of warranty coverage and limitations.
LT‐9037A
August 15, 2011
TL45 User Manual Rev 2.0r3
Page 5
Advertisement
Table of Contents
