Table of Contents
Advertisement
Trango Systems, Inc
Troubleshooting Ethernet Connections
If you cannot telnet into the radio or open an HTTP browser session, check your cable connections to ensure proper
use of cross‐over vs. straight‐through cable, and ensure your PC's subnet is routable to the radio's IP address.
System Information (sysinfo) Page
To display system configuration and status information type the command sysinfo. The sysinfo screen
is divided into 7 sections (0 –7):
Section
0
Hardware/Firmware versions & system uptime (since reboot)
1
Mac, serial number, and IP configuration information
2
Opmode, RF info, speed, and peer connection status
3
RF channel table
4
Area code information denotes which channels and power limits are
available based on region code of the radio. Area code is set by the factory
and cannot be altered by the user.
5
ARQ status, encryption, Auto‐rate shift, remarks, and LED RSSI function
6
Ethernet TX/RX statistics.
LT‐9037A
Description____________________________________________________
August 15, 2011
TL45 User Manual Rev 2.0r3
Page 17
Advertisement
Table of Contents
Need help?
Do you have a question about the TrangoLINK-45 and is the answer not in the manual?
Questions and answers