Mooer SuperRender Owner's Manual

Pitch Pedal
Owner's Manual
Precautions
* PLEASE READ CAREFULLY BEFORE PROCEEDING *
Power Supply
Please connect the designated AC adapter to an AC outlet of the correct
voltage.
Please be sure to use only an AC adapter which supplies 9V DC, 300 mA,
center minus.
Unplug the AC power adapter when not using or during electrical storms.
Connections
Always turn off the power of this and all other equipment before connecting
or disconnecting, this will help prevent malfunction and / or damage to other
devices. Also make sure to disconnect all connection cables and the power
cord before moving this unit.
Location
To avoid deformation, discoloration, or other serious damage, do not
expose this unit to the following conditions:
Direct sunlight
Heat sources
Magnetic fields
Extreme temperature or humidity
Excessive dusty or dirty location
High humidity or moisture
Strong vibration or shock
Interference with other electrical devices
Radios and televisions placed nearby may experience reception
interference. Operate this unit at a suitable distance from radios and
televisions.
Cleaning
Clean only with a soft, dry cloth. If necessary, slightly moisten the cloth.
Do not use abrasive cleanser, cleaning alcohol, paint thinners, wax,
solvents, cleaning fluids, or chemical-impregnated wiping cloths.
Handling
Do not apply excessive force to the switches or controls.
Do not let paper, metallic, or other objects into this unit.
Take care not to drop the unit, and do not subject it to shock or excessive
pressure.
Main Features
3 Pitch Modes: Harmony, Pitch Shift, Detune
Precise polyphonic pitch shifting
±2 oct pitch range
Pedal journey can be set at will
Memory function for saving parameters
Full metal shell
Heavyduty footswitch
True Bypass
AC adapter 9V DC power supply
Panel Instruction
3
10
4
9
5
6 7
8
2
11
12
1
01 TRUE BYPASS Footswitch: Push down the footswitch to
switch between effects and bypass status.
02
ON/OFF LED: Instructs effects or bypass status of Super Bender,
when the LED is lit up, the effects is on.
03 MODE Select Button and LED: Press the button to select
effect mode, the corresponding LED will be lit up to instruct the
current mode.
04
VALUE/MEMORY Encoder with Button: Dial the knob to
set pitch range (detune depth range) or change memories. Press
the button to switch state or ensure storing. Hold the button to
enter store function.
05 MEMORY Display: Instructs the memory position.
06
Full Raise Display and LED: Instructs the pitch range setting
value of full raised pedal status. The corresponding LED will be lit
up to instruct the current setting state.
07 Full Down Display and LED: Instructs the pitch range setting
value of full down pedal status. The corresponding LED will be lit
up to instruct the current setting state.
08
PEDAL RANGE SETTING Button: Press the button to select
setting object.
09
Pedal: Controls the pitch and detune depth in real-time.
10
DC 9V Power Jack: For power supply, use a 9-volt DC
regulated AC adapter, 300mA (plug polarity is positive on the
barrel and negative in the center).
11
INPUT Jack: 1/4" mono audio jack, for connecting guitar, bass,
keyboard, electronic drum, microphone, or other instruments.
12
OUTPUT Jack: 1/4" mono audio jack, outputs the effects signal.