Mooer MOD FACTORY PRO Owner's Manual

Power Supply
Use the correct AC outlet to connect the power adapter.
Use a power transformer with a negative external voltage
of 9V (± 10%) ≥300mA,
fire or other problems. When unused or thunderstorms please unplug
the power supply.
Connections
Before connecting the device or disconnecting it, be sure to turn off the power
and other equipment, which will help to avoid malfunction and damage to other
equipment. Also, make sure that all cables and power cords are disconnected
DUAL ENGINE MODULATION PEDAL
before moving the unit.
Place the place
To prevent deformation, discoloration, and other serious damage, avoid the following:
Direct sunlight
Magnetic field
Dusty or unclean place
Strongly vibrating or shakin
Electrical interference
When using the unit, the radio and the TV may cause interference.
Use the unit away from the radio and the TV.
Clean
Please use a dry, soft cloth to clean the unit. If necessary, wipe with
a slightly moist cloth. Do not use rough clean powder, alcohol, paint
thinner, wax, solvent, detergent and chemical agents such as
impregnated wipes.
Operating
Do not use brutal forces to use switches and control elements.
Do not allow paper, metal, and other objects to fall into the machine.
Be careful not to fall, do not subject it to shock and excessive pressure.
FCC certification
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
that may cause undesired operation.
Precautions
2 Independent processing modules containing a
total of 16 modulation effects
Adjustable signal chain routing
Store and recall up to 4 user presets
otherwise it will cause equipment damage, Tap Tempo functionality
Expression pedal expandability
Leslie style ACCELERATION pedal
True stereo outputs
Near heat source
High temperature and humidity
Humidity is large
A.SPEED
8
13
15
1、A.SPEED
Adjusts the rate of MODE A
2、A.DEPTH
Adjusts the depth/mix of MODE A
Main Features 3、A.CONTROL
Adjusts various effect parameters of MODE A
4、B.SPEED
Adjusts the rate of MODE B
5、B.DEPTH
Adjusts the depth/mix of MODE B
6、B.CONTROL
Adjusts various effect parameters of MODE B
7、MODE A
Selects the effect type for MODE A
8、ROUTING SWITCH
Pedal Layout Selects the internal signal chain routing (see ROUTING section of this manual)
9、STORE
Used for saving presets (see USING PRESETS section of this manual)
10、 MODE B
Selects the effect type for MODE B
11、 PRESET STATUS LED
Displays the currently selected Preset
A.DEPTH A.CONTROL B.SPEED B.DEPTH B.CONTROL
Auto-wah
11
12、 TAP TEMPO LED
This LED will illuminate red when the PRESET FOOTSWITCH is controlling TAP TEMPO
A B 10
B A
Step-ph Vibrato 13、 EFFECT SPEED LED
9
Displays the current speed of the modulation rate
12
14、 ON/OFF LED
10
TAP 14 Displays the ON/OFF status of the pedal
Hold for Hold for
15、 PRESET
TAP ACCEL
Press this footswitch to scroll through presets
16
Press and hold this footswitch to activate/deactivate tap tempo
When tap tempo is activated, press this footswitch multiple times to control the speed
PRESET ON/OFF
of the modulation rate
16、 ON/OFF
Press this footswitch to turn the pedal on/off
Press and hold this footswitch to activate effect acceleration
INPUT EXP
DC 9V 300mA
21 20 19 18 17
17、DC IN
Connect to a 9VDC power source
18、RIGHT OUTPUT
Connect to the input of your amplifier using a standard 1/4" jack cable
When used in stereo this output provides the Right Channel. When used
in MONO this output provides DSP BYPASS
19、LEFT OUTPUT
Connect to the input of your amplifier using a standard 1/4" jack cable
When used in stereo this output provides the Left Channel. When used
in MONO this output provides TRUE BYPASS
20、EXP
Connect to an external expression pedal using a 1/4" TRS stereo jack cable
21、INPUT
Connect to the output of your instrument using a standard 1/4" jack cable