Preparing The Paper; Loading Paper Into Cassette - Kyocera FS-1040 Operation Manual

Preparing the Paper

Loading Paper into Cassette

250 sheets of Letter or A4 paper (80 g/m²) may be loaded into the cassette.
After removing paper from the packaging, fan through the sheets to
separate them prior to loading.
If using paper that has been folded or is curled, straighten it prior to
loading. Failure to do so may result in a paper jam.
IMPORTANT Ensure paper is not stapled and clips are removed.
1
Open the cassette cover.
Note When using paper that is larger than A4/Letter, remove
the cassette cover. Gently press on both the left and right
sides of the cassette cover and pull.
If necessary, open the paper stopper shown in the figure.
3-10
Loading Paper
1 2