Clearing Paper Jams - Kyocera FS-1040 Operation Manual

Clearing Paper Jams

If paper jams in the paper transport system, or no paper sheets are fed at all, the printer automatically goes offline, and the
Attention indicator will flash. KYOCERA Client Tool can indicate the location of the paper jam (the component where the
paper jam has occurred). Remove the paper jam. After removing the paper jam, the printer will resume printing.
Possible Paper Jam Locations
Detailed paper jam positions are as follows. Refer to the indicated page number to remove the paper jam.
FS-1040/FS-1041
A
B
Paper jam location
A
B
C
General Considerations for Clearing Jams
Bear in mind the following considerations when attempting paper jam removal:
CAUTION When removing a paper jam, pull the paper gently so as not to tear it. Torn pieces of paper are
difficult to remove and may be easily overlooked, deterring the paper jam recovery.
• If paper jams occur frequently, try using a different type of paper, replace the paper with paper from another ream, or
flip the paper stack over. The printer may have problems if paper jams recur after the paper is replaced.
• Whether or not the jammed pages are reproduced normally after printing is resumed, depends on the location of the
paper jam.
Description
Rear cover
Cassette
Manual Feed tray
5-8
FS-1060DN/FS-1061DN
A
B
Reference page
Page 5-9, 5-10
Page 5-11, 5-12
Page 5-13
Troubleshooting
C