Installation On A Macintosh - Kyocera FS-1040 Operation Manual

Custom Mode
Use Custom Mode if you want to specify the printer port and select the software to be installed.

Installation on a Macintosh

This section explains how to install the printer driver in Mac OS.
2
Select the printer you want to install, select the Driver Package, and
click Install.
Note If the Found New Hardware Wizard appears, click
Cancel. If a hardware installation warning message appears,
click Continue.
If the Windows security window appears, click Install this
driver software anyway.
3
A message appears saying that your software is ready to use. To
print a test page, select the Print a test page checkbox and select
the printer.
Click Finish to exit the printer installation wizard.
This completes the printer driver installation procedure.
1
Select Custom Install tab.
2
Select the device to be installed, and click the arrow button to move
it to the Products to Install list.
3
Select the software to be installed, and click the arrow button to
move it to the Products to Install list.
4
Click Install.
5
A message appears saying that your software is ready to use. To
print a test page, select the Print a test page checkbox and select
the printer.
Click Finish to exit the printer installation wizard.
This completes the printer driver installation procedure.
1
Turn on the printer and the Macintosh.
2
Insert the included Product Library disc into the disc drive.
3
Double-click the Product Library disc icon.
4
Double-click OS X 10.5 or higher.
5
Double-click Kyocera OS X 10.5+ xxxxx.
2-5
Connecting and Printing