Kyocera FS-1040 Operation Manual page 42

4
Load the paper all the way in the cassette until the paper touches the
far inner side. Ensure the side to be printed is facing up and the
paper is not folded, curled, or damaged.
IMPORTANT Adjust so that there is no gap between the paper
length guide and the paper.
Note Load an amount of paper that fits under (does not
contact) the tabs on the width guides.
When using A6 paper, load the paper as shown in the
illustration.
5
Close the cassette cover.
Note When storing the cassette, or when using paper larger
than A4/Letter, remove the cassette cover.
6
Specify the paper size and type for the cassette using KYOCERA
Client Tool. For more information, refer to Configuration on page 2-
12.
Note Set the same paper size to the paper size that is set on
the printing system.
3-12
Loading Paper