Operation Panel; Indicators - Kyocera FS-1040 Operation Manual

Operation Panel

Indicators

There are two indicators located on the top right of the printer. The indicators are used to identify the status of the printer at
any time. To identify the printer status, check the indicators on the printer and then refer to the table below.
Indicator
Processing Indicator
(Green)
Attention Indicator
(Amber)
Note For other combinations of the two indicators, call for service. KYOCERA Client Tool (software bundled with
the GX Driver) will provide more detailed information about the printer status. (Refer to KYOCERA Client Tool on
page 2-10.)
Keys
Refer to the following table for the name and description of the basic functions of each key.
Key Status
[Quiet Mode] —
Key
—
[Cancel] Key —
[GO] Key At Ready
At Error
Status
Lit
Fast Flashing
Slow Flashing
Very slow (5-second
interval) flashing
Off
Lit
Fast Flashing
Slow Flashing
Off
Operation
Press once (lights up).
Press once (turns off).
Press and hold for 1
second or longer.
Press once.
Press and hold for 5
seconds.
Press and hold for 10
seconds.
Press once.
Meaning
Indicates online status (printing is possible).
Offline status.
The printer is processing data.
The printer is in sleep mode.
The power is off.
One of the following problems has occurred on the printer. Check the
error message in KYOCERA Client Tool.
• The rear cover or front cover is open.
• Toner is empty.
• The drum unit is not installed.
One of the following problems has occurred on the printer. Check the
error message in KYOCERA Client Tool.
• A paper jam has occurred.
• The top tray is full of paper. (The printer pauses after about 150
sheets are printed.)
• Memory is full.
• Non-genuine toner is installed.
One of the following problems has occurred on the printer. Check the
error message in KYOCERA Client Tool.
• The paper has run out while printing.
• The toner is running low.
The printer status is normal. Or, the power is off.
1-3
Machine Parts
Function
Turns on Quiet Mode.
Quiet Mode
If you prefer quiet operation, press
[Quiet Mode] to turn on Quiet
Mode. When Quiet Mode is on, the
print speed is slower.
Turns off Quiet Mode.
Cancels the job being sent from the
PC.
Switches online/offline.
Prints the status page.
Prints the network status page. (FS-
1060DN/FS-1061DN only)
Clears the error.