Kyocera FS-1040 Operation Manual page 56

Symptom
Printouts are curled.
Text is missing on the
Windows test page.
Printouts have dropouts
or stray dots.
Printouts have vertical
streaks.
Faint or blurred printing.
The altitude is 1500 m or
higher and printouts are
too light.
Checkpoints
Is the paper damp?
—
Check the Drum charge setting in the
Maintenance Menu.
—
—
—
Check the toner container.
Check the Print density setting in
KYOCERA Client Tool.
Check the Drum charge setting in the
Maintenance Menu.
Check the Altitude Setting in the
Maintenance Menu.
Corrective Actions
Replace the paper with new paper.
This is a problem specific to the
Windows OS. It is not a printer
problem. It does not affect print quality.
Increase the adjustment value for the
Drum charge setting in the
Maintenance Menu.
Run Drum refresh in the Maintenance
Menu.
Drum or developer unit may be
damaged. If the problem is not solved
even after printing several pages, call
for service.
The drum unit may be damaged. If the
problem is not solved even after
printing several pages, call for service.
If necessary, replace the toner
container.
Increase the adjustment value for the
Print density in the KYOCERA Client
Tool. For more information, refer to
KYOCERA Client Tool User Guide.
Decrease the adjustment value for the
Drum charge setting in the
Maintenance Menu.
Set the Altitude setting in the
Maintenance Menu to 1. If there is still
no improvement, change the value to
2.
5-4
Troubleshooting
Reference
Page
3-1
—
4-6
4-6
—
—
4-2
—
4-6
4-6