Preparing The Paper; Loading Paper Into A Cassette - Kyocera FS-1030D Operation Manual

Loading Paper

Preparing the Paper

Loading Paper into a Cassette

6
After removing paper from the
packaging, fan through the sheets
to separate them prior to loading.
If using paper that has been
folded or is curled, straighten it
prior to loading. Failure to do so
may result in a paper jam.
IMPORTANT: Ensure paper is not stapled and clips are removed.
1
Pull the cassette completely out of
the printer.
IMPORTANT: When pulling the
cassette out of the printer, ensure
it is supported and does not fall
out.
2
Adjust the paper length guide to
the paper size required.
3
Adjust the position of the width
guides located on the left and right
sides of the cassette. Press the
release button on the left guide
and slide the guides to the paper
size required.
NOTE:
The paper sizes are
marked on the cassette.
OPERATION GUIDE