Input/output device commands
Graphic display mode
Purpose:
Double-size letter in horizontal
Purpose:
Ps
Horizontal scroll on all lines
The format of the Horizontal Scroll Select command is as follows:
Purpose:
A-14
SurePOS Installation and Service
available.)
X'B0A0'--X'B0FF', X'B1A0'--X'C8FF' (Positions X'B100'--X'B19F' are not
available.)
X'CAA0'--X'CAFF', X'CBA0'--X'FDFF' (Positions X'CB00'--X'CB9F' are not
available.)
Simplified Chinese GB2312-80 (Font selection X'1B', X'53', X'33')
X'A1A0'--X'A1FF', X'A2A0'--X'A9FF' (Positions X'A200'--X'A29F' are not
available.)
X'B0A0'--X'B0FF', X'B1A0'--X'F7FF' (Positions X'B100'--X'B19F' are not
available.)
Traditional Chinese Big-5 (Font selection X'1B', X'53', X'34')
X'A140'--X'A1FF', X'A2A0'--X'C6FF' (Positions X'A200'--X'A23F' are not
available.)
X'C940'--X'C9FF', X'CA40'--X'F9FF' (Positions X'CA00'--X'CA3F' are not
available.)
1B 5C 3F 4C 47 Px 3B Py 3B Ph 3B Pw 3B Pd
This command specifies the graphic display mode. The control bytes
embedded in the command sequence (represented by Px, Py, Ph, and Pw
in the command format), change the graphic display characteristics. Pd
represents the data byte.
Px (display
0 ∼ 159 (X'30' ∼ X'31', X'35', X'39')
position)
Py (display
0 ∼ 39 (X'30' ∼ X'33', X'39')
position)
Ph (height)
1 ∼ 40 (X'31' ∼ X'34', X'30')
Pw (width)
1 ∼ 160 (X'31' ∼ X'31', X'36', X'30')
Pd
The display data.
1B 23 Ps
This command sets a character with double-size letter in horizontal. It is
available for all full-size letter, all half-size letter, and ANK font.
5 = Normal-size letter
6 = Double-size letter in horizontal
1B 5C 3F 4C 4D 53
This command sets horizontal scroll mode.
11-9-2005