Problems Concerning Network Functions; Cannot Connect To The Projector; When A Connection Is Made Using Easymp Network Projection, The Projected Image Remains As It Is, And A Connection Cannot Be Made From Another Computer; The Projector Is Not Found When Easymp Network Projection - Epson BrightLink 475Wi Operation Manual

Troubleshooting

Problems Concerning Network Functions

Cannot connect to the projector.

Check the message on the screen and then apply the following countermeasures.
Error Messages
The application version used is not supported. Install the
latest version of the application on your computer.
When a connection is made using EasyMP Network Projection, the projected image remains as it is, and a connection
cannot be made from another computer.
Check
Did the presenter leave the conference room without
cutting off the network connection?
The projector is not found when EasyMP Network Projection is started.
Check
Is the Wireless LAN unit connected?
For Wireless LAN
Install EasyMP Network Projection from the EPSON Projector Software for Meeting & Monitoring
CD-ROM supplied with the projector.
With EasyMP Network Projection, the connection with the computer that was previously connected
can be cut off when another computer tries to connect with the projector, and it connects with the
computer that is trying to connect.
Therefore, when a Projector Keyword is not set for the projector, or if you know the Projector
Keyword, you can cut off the current connection. Then you can perform a connection operation to
connect to the projector.
When a Projector Keyword is set for the projector but you do not know the Projector Keyword, restart
the projector and reconnect.
Check that the optional Wireless LAN unit is securely connected.
Remedy
Remedy
Remedy
45