Table of Contents
Advertisement
5
Gateway Configuration
MAC Control
You can block access to the Internet from clients on the local network by MAC
addresses. You can configure up to 32 MAC address filters on the unit.
Figure 5-15 MAC Control
MAC Address Control – Enables the feature. (Default: Enabled)
Block Connect to Internet – Blocks Internet access for the scpecified MAC
address. (Default: Enabled)
MAC Address – Specifies a local PC MAC address.
Add – Adds a new MAC address to the filter table.
Delete – Removes a MAC address from the filter table.
5-14
Advertisement
Table of Contents
Need help?
Do you have a question about the RG230 and is the answer not in the manual?
Questions and answers