Table of Contents
Advertisement
3
Initial Configuration
Figure 3-8 WAN Type - PPPoE
For the PPPoE option, you are prompted for the following information (specified
by the service provider):
PPPoE Network Server – The IP address of the PPPoE server, as specified by
the service provider.
Keep Alive – This option enables the unit to check periodically that the PPPoE
connection is still operating. If the connection is found to be lost, the unit
automatically attempts to reconnect to the service provider. (Default: Enabled)
Keep Alive Time – The time period the unit waits before checking that the
PPPoE connection is still operating. This parameter only applies when Keep
Alive is enabled. (Default: 60 seconds; Range: 10-180 seconds)
3-8
Advertisement
Table of Contents
Need help?
Do you have a question about the RG230 and is the answer not in the manual?
Questions and answers