4
System Settings
System Status
The system status page displays connectivity status information for the unit's
WiMAX (WAN) and LAN interfaces, firmware and hardware version numbers, and
the number of clients connected to your network.
Figure 4-8 System Status – Internet
INTERNET – Displays WAN (WiMAX) connection status:
• WAN IP – Displays the IP address assigned by the service provider.
• Subnet Mask – Displays the WAN subnet mask assigned by the service provider.
• Gateway – Displays the WAN gateway address assigned by the service provider.
• Primary DNS – Displays the WAN primary DNS address.
• Secondary DNS – Displays the WAN secondary DNS address.
• Connection Type – Displays the connection type for the WAN. Either FIXED for a
static IP setting, or DHCPC for dynamic IP assignment.
• Release – Releases the current IP address information.
• Renew – Initiates a new DHCP client request for an IP address.
Figure 4-9 System Status – Gateway
4-6
Need help?
Do you have a question about the RG230 and is the answer not in the manual?
Questions and answers