Defi Nitions - Danfoss ECL Comfort 100M User's Manual And Installation Instructions

Defi nitions
Actual flow temperature
The temperature that is measured in the fl ow at any
time.
Comfort period
A period of the day where comfort temperature is
selected.
Comfort temperature
The temperature maintained in the heating or hot water
circuits during comfort periods, which normally means
during daytime.
Function selector
A facility which makes it possible to override the mode of the
controller.
36
Defi nitions
Actual flow temperature
The temperature that is measured in the fl ow at any
time.
Comfort period
A period of the day where comfort temperature is
selected.
Comfort temperature
The temperature maintained in the heating or hot water
circuits during comfort periods, which normally means
during daytime.
Function selector
A facility which makes it possible to override the mode of the
controller.
36
Heating circuit
The circuit for heating the room/building.
Pt 1000 ohm sensor
All sensors used with the ECL Comfort controller is based on
the Pt 1000 ohm type. The resistance is 1000 ohms at 0 °C and
it changes with 3.9 ohms/degree C.
Reduced temperature
A period with decreased temperature.
Room sensor
A sensor placed in the room where the temperature is to be
controlled. The sensor is based on the Pt 1000 ohm type.
Room temperature
The temperature measured with the room sensor. The room
temperature can be controlled only when the sensor is
installed.
Weather compensation
A facility that enables the controller to take the outdoor
temperature into consideration for heat ing con trol.
This control is based on a user defi nable heat curve which
determines what the fl ow temperature should be when the
outdoor temperature varies.
Heating circuit
The circuit for heating the room/building.
Pt 1000 ohm sensor
All sensors used with the ECL Comfort controller is based on
the Pt 1000 ohm type. The resistance is 1000 ohms at 0 °C and
it changes with 3.9 ohms/degree C.
Reduced temperature
A period with decreased temperature.
Room sensor
A sensor placed in the room where the temperature is to be
controlled. The sensor is based on the Pt 1000 ohm type.
Room temperature
The temperature measured with the room sensor. The room
temperature can be controlled only when the sensor is
installed.
Weather compensation
A facility that enables the controller to take the outdoor
temperature into consideration for heat ing con trol.
This control is based on a user defi nable heat curve which
determines what the fl ow temperature should be when the
outdoor temperature varies.
37
37