Table of Contents
Advertisement
DIRECT WEB SCAN 19200
1.
Insert the Ulead Photo Express 4.0 CD-ROM into your CD-ROM drive.
2.
This program's installation window will appear automatically. If it does not
appear automatically, click on 'Start – Run', type [D:\SETUP.EXE] and click
on 'OK'
3.
Select the language you wish to use during the installation and click on 'OK'.
4.
Click on 'Next' to continue with the installation.
5.
Click on 'Yes' to accept the license agreement.
6.
Fill in your name and company name. Click on 'Next'.
Note:
The installation will be stopped if you do not fill in a company
name. Always give a company name.
7.
If desired, specify a location to install Photo Express in and click on 'Next'.
8.
If desired, specify another location for the program icons and click on 'Next'.
9.
Click on 'Next' again to confirm all the settings.
10.
After the installation, click on 'Finish' to complete the installation process.
You have now completed the installation of Ulead Photo Express 4.0. Continue to the
next chapter.
4.5
Connecting the DIRECT WEBSCAN 19200
Note:
A USB device is 'hot-swappable'. This means that the device can
be connected and disconnected from your computer whilst your
computer is turned on.
Note:
During installation in Windows 2000 and Windows XP, you may
receive a message saying that the driver has not been signed.
This does not cause a problem for the functionality. If you
register at www.trust.com/12389, you will be informed as soon
as a signed driver is available.
Connect the scanner after the software has been installed.
1.
Start Windows.
2.
Connect the scanner's USB plug to a free USB port on your computer.
3.
New hardware will be detected and the scanner will be automatically installed.
4.
In Windows XP, select the option to automatically search for the best driver.
Make sure the Trust installation CD-ROM is inserted into your CD-ROM drive.
5.
Windows XP will find the drivers. Select the 'Trust Direct Webscan 19200'
driver in the 'WinXP' folder on the Trust installation CD-ROM and click on
'Next'.
6.
If the driver has not been signed, click on 'Continue Anyway' in the next
window. This message will not be displayed if the driver has been signed.
7.
Click on 'Finish' to complete the installation.
Your scanner is now ready for use.
4
Advertisement
Table of Contents
Need help?
Do you have a question about the DIRECT WEBSCAN 19200 and is the answer not in the manual?