Introduction; Safety; Approval; Installation - Trust DIRECT WEBSCAN 19200 User Manual

DIRECT WEB SCAN 19200
1

Introduction

This instruction manual is for users of the TRUST DIRECT WEBSCAN 19200 V3.0.
The TRUST DIRECT WEBSCAN 19200 V3.0 is a 600x1200 dpi, high resolution, USB
scanner with a slim-line design. You can use it to produce optimal results with 48-bit
colour scanning.
The Direct Scan buttons on the scanner allow you to easily scan, copy, fax and e-mail
at the touch of a button.
2

Safety

Carefully read the following instructions before use.
- The TRUST DIRECT WEBSCAN 19200 does not require any special
maintenance. Use a slightly damp, soft cloth to clean the scanner.
- Do not use aggressive substances, such as white spirit, to clean the device.
These may harm the material.
- Do not submerge the device in liquid. This may be dangerous and will
damage the device. Do not use this device near water.
Make sure nothing is placed on the cable. Do not use this device in an area
-
where the cable can become worn or damaged as a result of people walking
over it.
- Do not repair this device yourself. If you open this device, you may touch live
components. This device must only be repaired by qualified personnel.
- Under the following circumstances, have the device repaired by qualified
personnel:
- The cable or plug is damaged or worn.
- The device has come into contact with rain, water or another liquid.
3

Approval

This device meets the essential requirements and other relevant conditions of
the applicable European directives. The Declaration of Conformity (DoC) is
available at www.trust.com/12389/ce.
4

Installation

4.1 Uninstalling old drivers and devices
The most common cause of faults during installation is the presence of a driver for a
similar, old device. The best solution is to first remove all drivers related to old
devices before installing the new driver. Make sure you only delete programs for old,
unused (similar) devices.
1. Enter the Windows 'Safe Mode'. (Press F8 when starting Windows before the
Windows start screen is displayed and select 'Safe Mode'.)
2. Click on 'Start – Settings – Control Panel' and double-click on the
'Add/Remove Programs' icon.
3. Find all the programs for similar, old devices and remove these by clicking on
the 'Add/Remove' button. When in the 'Safe Mode', it is possible for some
programs to appear twice. In that case, remove all the programs which appear
twice.
4. Restart the computer.
4.2 Installing TWAIN in Windows 98, Windows ME,
Windows 2000 and Windows XP
Note: The latest drivers can be downloaded from
www.trust.com/12389. Make sure you use the 12389-03 scanner
version 3.0 (48bit HW) driver. Check whether a new driver is
available and use this for the installation.
2