Step 3: Confirm And View The Current Amx Usb Device Connections - AMX Modero NXD/NXT-1200VG Operation/Reference Manual

FIG. 74 USB driver installation popup window

A Virtual NetLinx Master (VNM) is used when the target panel is not connected to a
physical NetLinx Master. In this situation, the PC takes on the functions of a Master
via a Virtual NetLinx Master. This connection is made by either using the PC's
Ethernet Address (via TCP/IP using a known PC's IP Address as the Master) or
using a direct mini-USB connection to communicate directly to the panel.
10.
Navigate back to the System Settings page.

Step 3: Confirm and View the current AMX USB device connections

1.
Navigate to Start > Settings >Control Panel > and double-click the System icon to launch the System
Properties dialog.
2.
Select the Hardware tab and click on the Device Manager button to launch the Device Manager dialog.

FIG. 75 Device Manager dialog showing USB device
VG-Series Modero Touch Panels
The previous version of the AMX USBLAN driver showed a USB connection icon in the system
tray when a panel was connected. The new version of the driver does not show an icon in the
System Tray.
Within the Device Manager dialog, the AMX USBLAN device appears under Network Adapters
(FIG. 75) and has a unique name such as AMX USB LAN LINK #2. The number changes
depending on which recognized panel is currently connected.
Configuring Communication
USB connected touch
panel (showing the
recognized panel)
89