Safety Precautions - DMX DR500 User Manual

There are a few items to consider when selecting a location for your
DR500 Receiver. Observe the following Safety Precautions:

Safety Precautions

FOLLOW STARTUP PROCEDURES
Do not plug in the DR500 Receiver until you have connected the system
and read Section 3: Basic Operations.
PROVIDE A SAFE LOCATION
Place the DR500 on a stable surface of sufficient size and strength,
where it will not be jarred, hit, or pushed off its surface. Ensure that all
cables and cords are out of the way and will not be tripped over, as this
could cause personal injury or serious damage to the DR500.
AVOID WATER AND MOISTURE
Do not expose the DR500 to any liquids, which are often found in flower
vases, coffee cups, rain from open windows, etc. If the DR500 is exposed
to any liquid, contact your DMX MUSIC affiliate, as serious damage could
occur to the DR500 or its components.
AVOID HUMIDITY, WIND, AND DUST
To avoid internal damage, the DR500 should be placed away from all
heat sources, including radiators, heater ducts, etc., out of direct sunlight,
and away from high humidity, excessive dust, or mechanical vibrations
that can cause damage to internal parts.
PROVIDE ADEQUATE VENTILATION
To avoid overheating, place the DR500 on a smooth, hard surface that
has 2" of clearance around the unit and adequate air circulation. If the
DR500 is placed in a closed area, such as a bookcase or rack, ensure
that proper ventilation is provided.
Never place the DR500 on a soft surface, such as a rug, sofa, or bed, that
would obstruct the required air flow into the DR500 ventilation slots.